Average Reviews:
(More customer reviews)This unit works great if your primary concern is a hidden system.There are other conventional units that outperform it of course. I like the outside temp sensor and am using it to monitor my intake air temp.I also added a second laser detector so I have them front & rear but am disappointed I can't add a radar antenna to the rear like the old model.
Click Here to see more reviews about: Whistler Pro-3450 Remote Installation Radar Detector
Enjoy total-band protection, with alerts for laser, radar, VG-2 and safety radar bands. Install your control panel 3 different ways and the blue text display will read accordingly. Competitive features like City/Highway modes, Quiet and Auto Quiet modes, or Whistler's own 'Stay Alert' help seal the deal, and you can even add voice alerts with the optional voice module.
Blue Text Display The intense blue text display provides distinct visual confirmation of signals detected, signal strength, and indicates engaged modes of operation.
Directional Display This allows your control panel to be mounted 3 different ways and the text viewed correctly.
Audio Alerts Provides distinct audio warnings for X, K, Ka band radar, safety radar, laser and VG-2.
Remote Installation The Pro-3450 features remotely installed detection modules routed to the control panel within the vehicle:
Radar Antenna--Compact, high-efficiency antenna receives radar signals.
Laser Module--High gain optical lens provides increased sensitivity and field of view for leading-edge laser detection.
In addition, you'll get outdoor temperature (handy to know when you need to watch for ice) and battery voltage displays.
Patented POP Mode Detection There are new guns out there that operate just like the instant-on guns of the past but with a very tough new twist--POP mode! This new gun is a normal K and Ka band radar gun detectable by most radar detectors made in the past 30 years until it's in POP mode. When the gun is in POP Mode and activated, a brief burst of energy, less than 1/15 of a second, is transmitted and the vehicle's speed is quickly acquired. A detector without POP Mode detection capability cannot respond to this brief transmission. All PRO Series have POP mode detection capabilities.
Stay Alert The Stay Alert feature is designed to test a driver's alertness. Within 30 to 60 seconds after the feature is engaged an alert is sounded; to show alertness, the driver must press the volume, city or the mute button within 3-5 seconds. If a button is pressed within 3-5 seconds, the cycle is repeated. If a button was not pressed within 3-5 seconds the unit alarms at full volume and the display shows an unique visual alert.
3 City Modes/Highway Mode Highway mode provides full audio and visual warning of laser/radar systems while maintaining full sensitivity. Highway mode is the default setting of all Whistler's laser/radar detectors. City mode helps reduce the annoyance of automatic door openers and burglar alarm alerts by providing an initial alert (same distance as Highway Mode) then remaining quiet unless the signal strength becomes very strong. When the signal increases the unit will alert briefly to notify you of the change in signal strength.
Quiet/Auto Quiet Modes Pressing QUIET before a signal is detected engages Auto Quiet Mode, which automatically reduces the audio level after the initial warning to a low audio level setting. Pressing QUIET during a radar/laser encounter silences audio alerts, while allowing visual alerts to keep you informed.
What's in the Box Radar Antenna, Control Panel and Power Cable, Laser Antenna, Mounting Brackets, Mounting Hardware.
Click here for more information about Whistler Pro-3450 Remote Installation Radar Detector
0 comments:
Post a Comment